3.5mm UV Lacquer SPC Flooring

3.5mm UV lacquer SPC flooring is a thin rigid-core vinyl flooring product with a UV-cured surface finish. The 3.5mm thickness is suitable for low-profile projects where floor height is limited, and the UV lacquer finish provides surface protection against wear, stains, and fading.

The product is supplied to distributors, importers, contractors, and project buyers. The available specifications—including the wear layer thickness, the locking system, the surface finish, and the board dimensions—depend on the specific product. Verify the product datasheet and request a sample before specification.

Three key clarifications:

• UV lacquer coating is not the same as the wear layer. The UV coating is a surface treatment that improves surface protection. The wear layer is the layer beneath the coating that provides the main abrasion resistance. The wear layer thickness determines the abrasion class.

• A waterproof core is not the same as a waterproof installation. The SPC core is waterproof, but the joints, the perimeter, and the subfloor moisture control also affect the system performance.

• The AC rating is not directly applicable to SPC. SPC should be described by the applicable resilient flooring standard, the abrasion test, and the specific wear layer thickness. The AC rating (AC3, AC4, AC5) applies to laminate flooring, not to SPC.

Important note: The specifications in this page are general. The actual product specification depends on the specific product. Verify the product datasheet and the test reports before specification. For general SPC product information, see the What Is SPC Flooring page. For SPC installation and maintenance, see the SPC installation and maintenance guide.

Technical Specifications

The following table provides a framework for the available specifications. Only the specifications that are confirmed for the specific product should be listed.

Contact us for the complete technical datasheet, test reports, and OEM specifications. Technical values vary by production specification, and the appropriate specification depends on the project requirements. We provide test reports with each shipment.

Confirmed vs to be confirmed. The specifications listed in the table are the data to confirm with the supplier. For the specific product, some specifications may be confirmed in the product datasheet, and others may require confirmation. Contact us for the confirmed specifications for your project.

Important note: Do not present a specification as verified without the corresponding test report. The UV coating layer count does not determine the wear resistance. The core density does not alone determine the moisture resistance. The AC rating does not apply to SPC. For general SPC product information, see the What Is SPC Flooring page.

UV Lacquer Finish and Surface Performance

The UV lacquer finish protects the flooring against wear, stains, and fading.

UV lacquer coating. The UV lacquer is applied to the surface and cured under ultraviolet light. The coating forms a crosslinked protective layer that resists surface wear, stains, and UV fading.

Surface texture. The surface texture may include embossed, EIR, matte, or other options. The actual availability depends on the specific product. Verify the surface texture against the design intent.

Surface performance. The actual surface performance—abrasion resistance, stain resistance, and UV resistance—depends on the specific product. Verify the test reports for the specific product.

Cleanability. The UV lacquer finish is designed to be easy to clean. Use a pH-neutral cleaner and avoid abrasive cleaners. For general cleaning guidance, see the SPC installation and maintenance guide.

Important note: The UV coating layer count is not a reliable indicator of the wear resistance. Verify the actual abrasion test result for the specific product. For general SPC product information, see the What Is SPC Flooring page.

Where 3.5mm SPC Flooring Works Best

The 3.5mm thickness is suitable for low-profile projects where floor height is limited.

Renovation projects. The 3.5mm thickness minimizes the floor build-up and can be installed over existing hard floors if the subfloor is flat, sound, and clean. Verify the door clearance and the transition details.

Residential interiors. The 3.5mm SPC is suitable for residential interiors where a thin profile is preferred. Verify the wear layer thickness against the expected traffic level.

Light commercial interiors. The 3.5mm SPC may be suitable for light commercial interiors. Verify the wear layer thickness and the product performance against the expected traffic. For heavy commercial traffic, a thicker SPC product may be required.

When 3.5mm may not be the best choice. The 3.5mm thickness may not be suitable for areas with heavy rolling loads, uneven subfloors, or demanding acoustic requirements. For these applications, a thicker product may be required. For wet-area flooring selection, see the Best Waterproof Flooring page.

Important note: The application suitability depends on the specific product's wear layer, locking system, and performance. Verify the product test data before specification. For general SPC product information, see the What Is SPC Flooring page.

Installation Requirements

The installation requirements follow the product-specific installation instructions. The following general requirements should be confirmed for the specific product. For general installation instructions, see the SPC installation and maintenance guide.

Subfloor flatness. Verify the subfloor flatness according to the product's installation instructions. The 3.5mm thickness does not absorb the subfloor unevenness—the subfloor must be prepared.

Subfloor moisture. Verify the subfloor moisture content according to the product's installation instructions and the local standard. A vapour barrier is required for ground-floor installations over concrete.

Installation method. Verify whether the specific product supports click-lock or glue-down installation. Do not assume that the same product can be installed with either method.

Expansion gaps. Verify the expansion gap requirements according to the product's installation instructions. The requirements depend on the room dimensions and the product.

Underlayment. Verify whether an underlayment is required and which type is permitted according to the product's installation instructions.

Underfloor heating. Verify the product's underfloor heating compatibility and the temperature limits. For SPC underfloor heating, see the SPC Flooring for Underfloor Heating page.

Important note: The installation requirements are product-specific. Verify the requirements for the specific product. For general installation instructions, see the SPC installation and maintenance guide.

Available Colors, Dimensions and Customization

The available colors, dimensions, and customization options depend on the specific product.

Colors and textures. The available colors and textures depend on the product. Contact us for the current options and the product codes.

Board dimensions. The available board dimensions depend on the product. Contact us for the current options.

Customization. The available customization options depend on the product and the order volume. For OEM and private-label manufacturing, see the Laminate Flooring OEM page.

Packaging. The packaging specifications depend on the product and the order requirements. Contact us for the packaging options.

Important note: The available options are product-specific. Contact us for the current options and the product datasheet.

Quality Control and Technical Documents

Buyers can request the following documents according to the target market and the project requirements:

• The technical datasheet for the specific product model

• The abrasion resistance test report for the specific product

• The moisture resistance test report for the specific product

• The dimensional stability test report for the specific product

• The emission documents for the target market

• The applicable quality management system or environmental management system certificate

• The applicable fire classification and slip resistance documents (if required by the project)

Important note:

• ISO 9001 and ISO 14001 are management system standards—they are not a product performance certification for the specific flooring product.

• The CE marking and the FloorScore certification have different scopes—verify which documents apply to the specific product.

• Do not claim that the product complies with all listed standards without the corresponding test reports.

For product certification information, contact us with your project requirements. For general SPC product information, see the What Is SPC Flooring page.

Bulk Orders, OEM/ODM and Shipping

The bulk order, OEM/ODM, and shipping conditions depend on the specific product and the order requirements.

MOQ. The MOQ depends on the specific product and the customization scope. Contact us for the current MOQ.

OEM/ODM. The available OEM/ODM options depend on the product and the order volume. For OEM and private-label manufacturing, see the Laminate Flooring OEM page.

Packaging and shipping. The packaging and shipping options depend on the destination market and the order volume. Contact us for the current options.

Lead time. The lead time depends on the product, the order volume, and the customization scope. Contact us for the current lead time.

Important note: The commercial terms are product-specific. Verify the terms for the specific product and order. For wholesale procurement guidance, see the Laminate Flooring Wholesale page. For OEM and private-label manufacturing, see the Laminate Flooring OEM page.

Frequently Asked Questions

1. Is 3.5mm SPC flooring durable enough for high-traffic areas?
The durability depends on the specific product's wear layer and performance. The 3.5mm thickness alone does not determine the durability. Verify the wear layer thickness and the abrasion test result for the specific product. For high-traffic commercial areas, a thicker SPC product with a thicker wear layer may be required.

2. Can it be installed in bathrooms and kitchens?
The SPC core is waterproof, but the installation must also be waterproof: joint sealing, perimeter sealing, and a vapour barrier (ground floors) are required for wet areas. Verify the specific product's suitability for the intended wet-area application. For wet-area flooring selection, see the Best Waterproof Flooring page.

3. Does the UV lacquer wear off?
The UV lacquer is a surface treatment that provides surface protection. The actual durability depends on the specific product, the traffic level, and the maintenance. Verify the product's test data for the specific product.

4. What type of underlayment is recommended?
The appropriate underlayment depends on the specific product. Some SPC products have integrated underlayment; others require a separate underlayment. Verify the product requirements before installation.

5. What is the difference between UV lacquer and wear layer?
The UV lacquer is a surface coating that improves surface protection. The wear layer is the layer beneath the coating that provides the main abrasion resistance. The wear layer thickness determines the abrasion class.

6. Does the 3.5mm thickness affect the durability?
The thickness affects the floor build-up and the underfoot feel. It does not automatically determine the wear resistance. The wear resistance depends on the wear layer. Verify the wear layer thickness and the abrasion test result for the specific product.

7. Can the product be customized for OEM projects?
Yes. The available customization options depend on the product and the order volume. For OEM and private-label manufacturing, see the Laminate Flooring OEM page.

8. What documents should I request before ordering?
Request the technical datasheet, the abrasion resistance test report, the moisture resistance test report, the emission documents, the installation manual, the maintenance guidelines, and the warranty terms. Verify the documents against the specific product model before ordering.

Request a Sample or Project Quote

Send us your target market, required wear layer thickness, board dimensions, surface finish, expected order quantity, packaging and private-label requirements, required certification or test documents, target delivery date, and sample requirements. Our team can confirm the available product options and provide the relevant samples and quotation for your project.

Information to include in your enquiry:

• Target market

• Required wear layer thickness

• Board dimensions and surface finish

• Expected order quantity

• Packaging and private-label requirements

• Required certification or test documents

• Target delivery date and sample requirements

• Contact details

Important note: The product availability, lead time, certification, and pricing depend on the specific product and the project requirements. Contact us with your project requirements for accurate information. For wholesale procurement guidance, see the Laminate Flooring Wholesale page. For OEM and private-label manufacturing, see the Laminate Flooring OEM page.

Related Pages

• What Is SPC Flooring

• SPC installation and maintenance guide

• SPC Flooring for Underfloor Heating

• Waterproof SPC Flooring

• Best Waterproof Flooring

• Laminate Flooring Wholesale

• Laminate Flooring OEM

CTA

For samples, technical documents, or a project-based quotation for 3.5mm UV lacquer SPC flooring, contact us with your project requirements. For general SPC product information, see the What Is SPC Flooring page. For SPC installation and maintenance, see the SPC installation and maintenance guide. For SPC underfloor heating, see the SPC Flooring for Underfloor Heating page. For wet-area flooring selection, see the Best Waterproof Flooring page.