5mm SPC Click Rigid Core SPC Flooring
5mm SPC Click Rigid Core Flooring offers a robust solution combining strength, comfort, and design flexibility. Its rigid core construction provides excellent dimensional stability under temperature and humidity variations. The click-lock installation system ensures faster project completion with minimal labor. With a 100% waterproof structure, it is highly suited for wet areas such as kitchens and bathrooms. Acoustic backing layers further enhance comfort, making it ideal for residential and commercial spaces. Meeting international standards for wear resistance, emissions, and slip safety, this flooring type guarantees long-term performance, low maintenance, and superior value in modern construction projects.
5mm SPC Click-Lock Flooring Overview
5mm SPC click-lock rigid core flooring is a stone plastic composite plank with a rigid core, a click-lock edge profile and an optional attached acoustic backing. The 5mm figure refers to the total plank thickness including the wear layer and SPC core; whether an attached IXPE or EVA backing is included in this figure depends on the specific SKU and is stated in that SKU's specification sheet. Available surface options include wood-grain and stone-look decorative films with a UV-cured coating. The click-lock system allows floating installation without adhesive. Typical applications include bedrooms, living rooms, kitchens, bathrooms, offices and retail interiors, subject to the wear layer and project conditions. This page focuses on the click-lock configuration; for factory supply terms and for waterproof structure details, refer to the dedicated pages on those topics. For specifications, samples or bulk pricing, send your project details through the inquiry form on this page.
Technical Specifications of 5mm SPC Flooring
The table below lists the parameters buyers need to confirm before ordering. Values are to be verified by our product team against the actual product specification sheet and test reports for each SKU; they are not estimated or copied from general industry figures. Where a value is not yet confirmed, it is marked as pending and will be supplied on request.
| Parameter | Information to be provided |
|---|---|
| Total thickness | Nominal total thickness and tolerance per SKU (pending confirmation) |
| Wear layer | Available wear layer thicknesses per SKU (pending confirmation; actual range to be filled from specification sheet) |
| Plank size | Length and width options per SKU (pending confirmation; actual range to be filled from specification sheet) |
| Core | SPC core composition and layer structure (calcium carbonate, PVC and stabilizers, per specification sheet) |
| Underlayment | Whether IXPE or EVA backing is attached, and its thickness (pending confirmation per SKU) |
| Locking system | Locking profile type and available systems (to be confirmed: Unilin, Valinge or in-house system) |
| Surface | UV coating, wood-grain or stone-look options actually offered |
| Packaging | Pieces per carton, coverage per carton, packaging method |
| Ordering | MOQ, sample availability, lead time and customization conditions |
Buyers should treat pending values as items to confirm in the quotation request rather than as final specifications.
Available Wear Layers, Colors and Backing Options
Wear layer, color, surface texture and backing are configured per order. Each available configuration is shown with a corresponding product photo or color swatch rather than a generic statement that various designs are available. The wear layer range and backing options actually supplied are listed in the specification sheet for each SKU. Buyers should confirm the exact wear layer and backing combination for their project before quotation, and should not assume that an optional configuration is the default specification.
Where Can 5mm SPC Click Flooring Be Used?
Residential use: bedrooms, living rooms, kitchens and bathrooms, subject to the installation requirements below. Retail and office use: suitable where the specified wear layer and test results support the expected foot traffic. Commercial suitability depends on the actual wear layer, test data and warranty terms for the specific SKU; 5mm thickness alone is not a guarantee of performance in high-traffic commercial environments. Buyers should state the intended application and expected traffic level when requesting a quote so the appropriate configuration can be recommended.
Installation Requirements and Limitations
Subfloor evenness, expansion gaps along walls and fixed structures, and pre-installation checks should follow the installation instructions supplied with the product. Underfloor heating compatibility and temperature limits are to be confirmed against the product installation guide for the specific SKU. Note that a water-resistant SPC core does not by itself make the entire flooring system, joints and subfloor fully waterproof; appropriate precautions are required in wet areas. Detailed waterproofing structure and joint treatment are covered on the dedicated waterproof SPC page.
Quality Control and Technical Documents
Our quality control process covers incoming material checks, in-line inspection during extrusion and lamination, and final inspection of click profiles, dimensions and surface finish. The following documents are available on request for each SKU: product specification sheet, test reports held for that SKU, and the warranty document. We do not claim compliance with a specific standard or certification unless a corresponding document exists for the product; buyers should request the documents relevant to their project before specifying the product.
Bulk Orders, Samples and Project Quotes
To request samples or a bulk quotation, provide the following through the inquiry form: project type, required quantity, destination country, preferred wear layer, attached underlay requirement, and whether you need a sample or a quotation. Name, email and contact details are also required. Not all fields are mandatory; the aim is to collect enough information for an accurate quotation while keeping submission simple. This section covers the inquiry process only; factory supply capacity and production terms are described on the dedicated factory supply page.
Frequently Asked Questions
1. What is included in the 5mm thickness of this SPC flooring?
The 5mm refers to the total plank thickness including the wear layer and SPC core. Whether an attached IXPE or EVA backing is included in this figure depends on the specific SKU; the specification sheet for that SKU states the layer breakdown, and our team will confirm it with your quotation.
2. What wear layer options are available for this 5mm SPC flooring?
Available wear layer thicknesses are listed per SKU in the specification sheet. Please state your intended application so the appropriate option can be confirmed; optional specifications are not the same as the default specification.
3. Does this SPC flooring come with an attached IXPE or EVA underlay?
Attached backing is available as a configuration option. Please confirm the backing type and thickness for your order; not all SKUs include an attached underlay.
4. Is this 5mm SPC flooring suitable for commercial projects?
Commercial suitability depends on the actual wear layer, test data, expected foot traffic and warranty terms for the specific SKU. Please provide the intended application and traffic level so we can confirm whether the product meets your project requirements.
5. Can I request samples or a bulk quotation?
Yes. Submit your project type, required quantity, destination country, preferred wear layer and backing requirement through the inquiry form, and our team will respond with sample and quotation details.
