News Center
SPC flooring surface peeling off refers to the delamination or separation of the wear layer or decorative film from the rigid core in Stone Plastic Composite flooring systems. This issue typically results from material defects, poor lamination bonding, or improper installation and directly impacts…
2026/03/24 09:31
In today’s competitive flooring market, design is no longer secondary to performance—it is an integral part of product value. Among the most popular design-driven flooring options, herringbone flooring has become a preferred choice for architects, designers, and developers seeking to combine visual…
2026/03/23 10:19
SPC flooring click lock breaking issue refers to the failure or damage of the interlocking joint system in rigid core flooring. This problem typically occurs when mechanical stress, improper installation, or low-quality manufacturing compromises the integrity of the click-lock structure, resulting…
2026/03/23 09:46
SPC flooring cracking under heavy furniture refers to structural failure of rigid core flooring when excessive point loads exceed material strength or installation limits. Although SPC flooring offers high compressive strength, improper load distribution, weak subfloor conditions, or low-quality…
2026/03/23 09:42
SPC flooring buckling in hot weather refers to the deformation or lifting of rigid core flooring due to thermal expansion and installation constraints. Despite SPC’s dimensional stability, improper installation, insufficient expansion gaps, and extreme temperature exposure can lead to structural…
2026/03/23 09:41
Why Is My SPC Flooring Separating at Joints? Causes, Solutions & Engineering GuideProduct DefinitionSPC (Stone Plastic Composite) flooring is a rigid core click-lock flooring system engineered for dimensional stability and durability. Joint separation occurs when planks disengage at locking…
2026/03/22 09:11
SPC (Stone Plastic Composite) flooring is a rigid core vinyl flooring system composed of limestone powder and PVC, designed for dimensional stability and waterproof performance. However, improper installation or environmental factors may cause expansion issues, affecting floor flatness and long-…
2026/03/22 09:09
SPC (Stone Plastic Composite) and laminate flooring are cost-effective surface materials widely used in rental property investment. SPC is a rigid, waterproof composite flooring, while laminate is a fiberboard-based layered product designed for aesthetic performance and moderate durability in…
2026/03/22 09:08
Laminate flooring vs vinyl plank scratch resistance is a critical evaluation factor for commercial and residential flooring procurement. The comparison focuses on surface hardness, wear layer technology, impact resistance, and long-term abrasion performance under high-traffic environments.Product…
2026/03/21 10:53
SPC flooring vs LVT performance difference is a key evaluation factor in modern flooring procurement for commercial and residential projects. The comparison focuses on rigidity, durability, dimensional stability, installation behavior, and lifecycle performance under different environmental…
2026/03/21 10:50
Waterproof flooring vs engineered wood maintenance cost is a key evaluation factor in commercial and residential construction procurement. It determines lifecycle cost, maintenance frequency, durability, and long-term ROI for developers, contractors, and distributors selecting flooring systems for…
2026/03/21 10:47
Laminate flooring vs tile for kitchen renovation compares two widely used flooring systems—laminate panels and ceramic/porcelain tiles—based on cost, water resistance, durability, and installation performance in kitchen environments.Technical Parameters and SpecificationsParameterLaminate…
2026/03/20 17:18
