SPC Flooring Price Philippines: Cost per Square Meter & B2B Procurement Guide

If you are comparing SPC flooring prices in the Philippines, the typical material price ranges from PHP 400 to PHP 2,000 per square meter (m²), depending mainly on thickness, wear layer, product quality, brand, and project requirements.

For most residential and standard commercial projects, 5–6mm SPC flooring with a 20 mil wear layer falls into the standard price range of approximately PHP 700–1,200/m². Premium 6–8mm SPC flooring with a 30 mil wear layer generally costs PHP 1,200–2,000/m².

For B2B buyers, however, the material price is only one part of the total procurement cost. Thickness, wear layer, click system, attached underlayment, packaging, order quantity, MOQ, shipping method, and project location can all affect the final quotation.

This guide explains SPC flooring prices in the Philippines, the major cost factors, installed costs, project-level examples, and the key specifications contractors, developers, distributors, and procurement managers should confirm before placing an order.

SPC Flooring Price Philippines: Quick Price Guide

The following ranges provide a practical starting point for evaluating SPC flooring quotations in the Philippine market.

Installation can add approximately PHP 200–400/m², depending on the project and scope of work.

For B2B projects, buyers should not compare suppliers based only on the PHP/m² material price. A lower quotation may reflect a thinner core, lower wear layer, different underlayment, different packaging, or different installation and delivery terms.

What Determines SPC Flooring Price in the Philippines?

SPC flooring prices vary because products with the same appearance can have significantly different specifications.

The most important price factors include:

1. SPC Flooring Thickness

Thickness is one of the most visible differences between product specifications.

Typical price and application ranges are:

• 4mm: approximately PHP 400–600/m²

• 5mm: approximately PHP 500–800/m²

• 6mm: approximately PHP 800–1,500/m²

• 8mm: approximately PHP 1,200–2,000/m²

Thicker SPC flooring generally requires more material and can increase manufacturing costs.

For residential projects, 5mm products can provide a balance between price and durability. For commercial or high-traffic projects, 6–8mm products may be more appropriate.

2. Wear Layer Thickness

The wear layer is another major factor affecting both price and service life.

Typical specifications include:

• 12 mil: budget applications and lower-traffic areas

• 20 mil: standard residential and moderate-traffic applications

• 30 mil: commercial and high-traffic applications

A 30 mil wear layer generally costs substantially more than a 12 mil wear layer.

For procurement, buyers should always request the actual wear-layer specification rather than comparing products only by total board thickness.

3. SPC Core Density and Material Composition

SPC flooring normally combines PVC resin with limestone filler.

The source material indicates typical core densities around 1.8–2.0 g/cm³. Higher-grade products may use virgin PVC and higher-grade limestone.

Material composition can affect:

• Product density

• Dimensional stability

• Indentation resistance

• Manufacturing cost

• Overall product quality

Therefore, two 5mm SPC products should not automatically be considered equivalent.

4. Click System

The click-lock system is an important consideration for B2B buyers even when it is not immediately reflected in a supplier's headline price.

Before comparing quotations, confirm:

• Click-lock system

• Joint design

• Locking performance

• Installation method

• Compatibility with the intended subfloor

• Replacement or installation requirements

For large projects, a small difference in installation performance can affect labor efficiency and the risk of joint failure.

5. Attached Underlayment

Some SPC products include factory-attached IXPE underlayment, while others may require separate underlayment.

The source data indicates attached pad thicknesses commonly ranging from approximately 1.0 to 2.5mm, depending on the product tier.

Additional underlayment can add approximately PHP 100–200/m² depending on the material.

When comparing suppliers, confirm whether the quoted price includes:

• SPC flooring

• Attached pad

• Separate underlayment

• Moisture barrier

• Other installation materials

Packaging Can Also Affect Your B2B SPC Flooring Cost

For commercial procurement, the quoted PHP/m² price should always be considered together with the packaging specification.

Ask the supplier to provide:

• Pieces per carton

• m² per carton

• Carton dimensions

• Gross and net weight

• Cartons per pallet, if applicable

• Pallet dimensions

• Total packaging weight

• Protection against moisture and transportation damage

This information is particularly important when purchasing SPC flooring for container shipment or large-scale projects.

A supplier may quote a competitive price per m², but differences in packaging efficiency, carton quantity, palletization, and shipping volume can affect the final landed cost.

For B2B procurement, always compare suppliers using the same unit:

PHP/m² + packaging + shipping + applicable project costs

rather than comparing only the factory or material price.

MOQ, Project Quantity and Container Orders

Minimum order quantity (MOQ) should be confirmed before requesting a formal quotation.

The appropriate purchasing method can vary considerably between:

• Small residential projects

• Condo developments

• Commercial offices

• Hotels

• Restaurants

• Retail projects

• Property development projects

• Distributor orders

• Container-level purchases

For smaller orders, the supplier may quote a standard product price.

For larger projects, buyers should request project-specific pricing and confirm whether volume discounts are available.

The source data indicates that volume discounts may become available for orders of 100+ m², while larger developer purchases may receive additional discounts depending on supplier and project conditions.

Before ordering, confirm:

1. MOQ per color or SKU

2. MOQ per order

3. Available stock

4. Production lead time

5. Packaging requirements

6. Container loading arrangement

7. Delivery terms

8. Payment terms

Do not assume that a quoted price for 100 m² is automatically applicable to a container order. Request a project-specific quotation.

Shipping and Landed Cost for SPC Flooring

For Philippine B2B buyers, shipping should be evaluated separately from the SPC flooring material price.

The final procurement cost may include:

Material + packaging + inland transportation + ocean freight + destination charges + delivery + installation

The exact shipping cost depends on factors such as:

• Order volume

• Shipping method

• Origin

• Destination

• Container utilization

• Delivery location

• Project schedule

• Incoterms and supplier quotation terms

For this reason, a supplier should provide a quotation that clearly states what is included and excluded.

For large projects, ask for both:

Price per m²

and

Total project quotation

This makes it easier to compare suppliers on a genuine landed-cost basis.

SPC Flooring Price by Thickness

The price ranges above are indicative market ranges from the current guide and should not be treated as a fixed supplier quotation.

For project procurement, the final price should be based on the complete specification.

SPC vs Other Flooring Prices in the Philippines

SPC flooring is often compared with laminate, ceramic tile, engineered wood, and solid hardwood.

SPC is particularly attractive in the Philippines because its waterproof properties and installation characteristics make it suitable for humid environments, residential interiors, condos, commercial spaces, and other applications where moisture resistance is important.

Recommended SPC Specifications by Project Type

Residential Condo Projects

For a typical condo project, a standard SPC specification can be:

• Thickness: 5–6mm

• Wear layer: 20 mil

• Material price: approximately PHP 700–1,000/m²

• Installed cost: approximately PHP 1,000–1,400/m²

This specification provides a balance between initial cost and durability.

Commercial Offices

For offices with rolling chairs and heavier foot traffic:

• Thickness: 6–8mm

• Wear layer: 30 mil

• Material price: approximately PHP 1,200–1,800/m²

• Installed cost: approximately PHP 1,500–2,200/m²

Restaurants and Retail

For restaurants and retail spaces:

• Premium SPC

• 30 mil wear layer

• Slip-resistant finish where required

• Material price: approximately PHP 1,500–2,000/m²

• Installed cost: approximately PHP 1,800–2,500/m²

Affordable Housing and Large Developments

For large-volume residential development:

• Thickness: 4–5mm

• Wear layer: 12 mil

• Material price: approximately PHP 400–600/m²

• Volume discounts may apply to larger orders

However, buyers should balance initial price against expected replacement and maintenance costs.

How to Compare SPC Flooring Suppliers

When comparing two or more SPC flooring suppliers, use the same specification.

A proper comparison should include:

This prevents a common procurement mistake: choosing the lowest price without checking whether the products actually have the same specifications.

Common SPC Flooring Problems in the Philippine Market

Low-quality SPC with a Thin Wear Layer

Very low-priced SPC products may use a thin wear layer that wears prematurely under heavier household or commercial traffic.

For standard residential applications, the guide recommends considering at least 20 mil, while commercial applications should generally consider 30 mil.

Inconsistent Thickness

Poor extrusion control can result in inconsistent product thickness.

For bulk orders, request samples and measure the actual thickness with a micrometer.

A tolerance specification should be agreed with the supplier before mass production.

Unclear Installation Costs

Installation quotations can vary depending on whether they include:

• Underlayment

• Trim

• Old-floor removal

• Subfloor preparation

• Installation labor

• Other accessories

Always request an itemized quotation.

VOC and Indoor Air Quality

Cheap SPC products may have higher VOC emissions.

For projects where indoor air quality is important, buyers should request relevant certifications or test reports, such as FloorScore or GREENGUARD, where applicable.

Subfloor Preparation and Installation Costs

SPC flooring performance depends not only on the product itself but also on installation quality.

The guide recommends a subfloor flatness of approximately ≤3mm over 3m.

If the concrete floor is uneven, additional preparation may be necessary.

Typical additional costs may include:

• Subfloor preparation: PHP 100–200/m²

• Underlayment: PHP 100–200/m²

• Installation: PHP 200–400/m²

• Trim: PHP 100–200/m²

• Delivery: PHP 50–100/m²

These costs vary by project and location and should be confirmed in the supplier or installer quotation.

50 m² Condo SPC Flooring Cost Example

Consider a 50 m² two-bedroom condo project in Mandaluyong, Metro Manila.

Option A: Budget SPC

• 4mm thickness

• 12 mil wear layer

• Material: PHP 500/m²

• Underlayment: PHP 100/m²

• Installation: PHP 200/m²

• Tile removal: PHP 200/m²

• Trim: PHP 100/m²

Total: PHP 55,000

Approximate cost: PHP 1,100/m²

Option B: Standard SPC

• 5mm thickness

• 20 mil wear layer

• Material: PHP 800/m²

• Underlayment: PHP 150/m²

• Installation: PHP 250/m²

• Tile removal: PHP 200/m²

• Trim: PHP 100/m²

Total: PHP 75,000

Approximate cost: PHP 1,500/m²

Option C: Premium SPC

• 6mm thickness

• 30 mil wear layer

• Material: PHP 1,200/m²

• Underlayment: PHP 200/m²

• Installation: PHP 300/m²

• Tile removal: PHP 200/m²

• Trim: PHP 100/m²

Total: PHP 100,000

Approximate cost: PHP 2,000/m²

Based on the example in this guide, the standard option provides the best balance between initial investment and expected service life.

SPC Flooring Procurement Checklist for Philippine Buyers

Before placing a bulk order, confirm all of the following:

• Product thickness

• Wear layer thickness

• Core density

• Click-lock system

• Attached underlayment

• Surface finish

• Packaging specification

• Pieces per carton

• m² per carton

• MOQ

• Available colors and SKUs

• Sample approval

• Production lead time

• Shipping terms

• Delivery location

• Project quantity

• Volume discount

• Warranty terms

• VOC and other applicable certifications

• Technical test reports

For large projects, always approve a physical sample before mass production or bulk shipment.

How to Request an SPC Flooring Quotation

For an accurate B2B quotation, provide the supplier with:

Project location:
Philippines + specific city/project location

Required quantity:
Total m²

Product specification:
Thickness + wear layer + surface design + click system

Application:
Residential / condo / office / hotel / restaurant / retail / other

Packaging requirement:
Carton and pallet requirements, if applicable

Delivery requirement:
Project location and preferred shipping arrangement

Target schedule:
Required delivery date

The more complete the project information, the easier it is for the supplier to provide a meaningful quotation rather than a generic price per square meter.

FAQ: SPC Flooring Price Philippines

What is the price of SPC flooring per square meter in the Philippines?

SPC flooring typically ranges from PHP 400–2,000/m² depending on thickness, wear layer, brand, and product specification.

Budget products are approximately PHP 400–700/m², standard products PHP 700–1,200/m², and premium products PHP 1,200–2,000/m².

How much does SPC flooring installation cost per square meter?

Installation labor is approximately PHP 200–400/m² based on the market ranges presented in this guide.

The final installed cost depends on the flooring specification, subfloor condition, accessories, and project scope.

What thickness of SPC flooring is best for residential use?

A 5mm SPC product with a 20 mil wear layer is a practical standard specification for many residential applications.

A 4mm product can be considered for low-traffic areas, while thicker products may be appropriate for heavier applications.

Is SPC flooring cheaper than ceramic tile in the Philippines?

The costs can be comparable.

SPC standard flooring is approximately PHP 700–1,200/m² for material, while ceramic tile is approximately PHP 600–1,500/m² for material based on the ranges in this guide.

The final decision should also consider installation, waterproofing, comfort, maintenance, and project requirements.

Does SPC flooring include underlayment?

Some SPC products have factory-attached IXPE underlayment.

Always check the product specification. If additional underlayment is required, it may add approximately PHP 100–200/m².

What should I check when buying SPC flooring in bulk?

For B2B orders, check:

• Thickness

• Wear layer

• Click system

• Core density

• Packaging

• MOQ

• Project quantity

• Lead time

• Shipping terms

• Warranty

• Test reports

• Total landed cost

Do not compare suppliers only by the quoted PHP/m² price.

Is imported SPC flooring better than local SPC flooring?

Not necessarily.

Product quality depends on the actual specification, manufacturing quality, quality control, and supplier reliability.

For bulk purchases, request samples and verify thickness, wear layer, surface quality, and relevant test documentation before ordering.

How much does SPC flooring cost for a 50 m² condo?

Based on the project examples in this guide, total costs can range from approximately PHP 55,000 to PHP 100,000, depending on product tier and installation scope.

That corresponds to approximately PHP 1,100–2,000/m² in the examples provided.

Why Choose FloorCasa for SPC Flooring Projects?

For contractors, developers, distributors, and procurement managers, choosing the right SPC flooring supplier requires more than comparing a single price.

FloorCasa can support project buyers with:

• SPC flooring product specifications

• Thickness and wear-layer selection

• Project quantity evaluation

• Product and sample confirmation

• B2B quotation support

• Supplier and product specification verification

• Commercial and residential project requirements

If you already know your project area and required specification, provide the following information when requesting a quotation:

Project location + total m² + required thickness + wear layer + preferred design + target delivery schedule.

Our team can then evaluate the appropriate SPC flooring specification and provide a project-based quotation.

Request an SPC Flooring Quotation

Tell us your project requirements:

• Project location

• Required quantity in m²

• Preferred thickness

• Required wear layer

• Application type

• Preferred design/color

• Target delivery schedule

Request a quotation from the FloorCasa flooring team for your Philippines project.

Final Takeaway: What Is a Good SPC Flooring Price in the Philippines?

For most buyers, the most useful question is not simply “How much is SPC flooring per square meter?”

The better question is:

“What specification am I getting for the quoted price per m², and what will the complete project cost?”

As a general reference:

• Budget: PHP 400–700/m²

• Standard: PHP 700–1,200/m²

• Premium: PHP 1,200–2,000/m²

• Installation: approximately PHP 200–400/m²

For many residential projects, 5–6mm SPC with a 20 mil wear layer offers a practical balance between price and durability.

For commercial and high-traffic applications, 6–8mm SPC with a 30 mil wear layer is a more appropriate specification to evaluate.

For B2B procurement, always compare the complete specification, packaging, MOQ, project quantity, shipping terms, and total project cost rather than choosing a supplier based solely on the lowest PHP/m² quotation.