8mm SPC Rigid Core Vinyl Flooring
8mm waterproof SPC vinyl flooring is an ideal choice for bathroom environments due to its waterproof core, scratch and stain resistance, and durability. Its rigid structure prevents expansion and warping, while the high-quality wear layer protects the floor from daily wear and tear. Easy to install with click-lock systems, it requires minimal maintenance and offers long-lasting performance. Compliant with EN, DIN, and E1 standards, SPC flooring ensures a safe, environmentally friendly solution for wet areas. Available in various designs and textures, it enhances the aesthetic appeal of your bathroom, offering superior value compared to traditional flooring options.
8mm SPC rigid core vinyl flooring is a stone plastic composite plank built around a rigid core, finished with a click-lock edge profile and available with an optional attached acoustic backing. The 8mm figure describes the total plank thickness, covering the wear layer and the SPC core together; if an IXPE or EVA backing is attached, the SKU specification sheet states whether that backing is counted inside the 8mm figure or added on top. Surface options include wood-grain and stone-look decorative films with a UV-cured coating. The click-lock system supports floating installation without adhesive, and a glue-down method is available where a tighter seal is required. Supply covers residential and selected commercial projects. Layer structure differs between SKUs, so buyers should confirm the thickness breakdown for the exact item before ordering. Use the inquiry form on this page to request specifications, samples or bulk pricing.
Technical Specifications of 8mm SPC Flooring
The table below sets out the parameters a buyer needs before ordering. Our product team verifies each value against the specification sheet and the test reports held for that SKU; figures are not borrowed from general industry averages. Entries marked as pending are confirmed during quotation and are not final specifications.
| Parameter | Information to be provided |
|---|---|
| Total thickness | Nominal total thickness and tolerance per SKU (pending confirmation) |
| Core thickness | SPC core thickness per SKU (pending confirmation) |
| Wear layer | Available wear layer thicknesses per SKU (pending confirmation; actual range to be filled from specification sheet) |
| Plank size | Length and width options per SKU (pending confirmation; actual range to be filled from specification sheet) |
| Core | SPC core composition and layer structure (limestone and PVC based, per specification sheet) |
| Underlayment | Whether IXPE or EVA backing is attached, its thickness, and whether that thickness sits inside or outside the 8mm figure (pending confirmation per SKU) |
| Locking system | Locking profile type and available systems (to be confirmed: Unilin, Valinge or in-house system) |
| Surface | UV coating, wood-grain or stone-look options actually offered |
| Packaging | Pieces per carton, coverage per carton, packaging method |
| Ordering | MOQ, sample availability, lead time and customization conditions |
Pending entries should be raised in the quotation request rather than treated as settled specifications.
Waterproof Performance and Suitable Applications
The SPC core resists water, but the core alone does not make the whole floor system waterproof. Joints, wall edges, subfloor condition, edge sealing and the chosen installation method all shape how the finished floor behaves in wet areas. Occasional splashes and areas holding standing water or receiving direct shower spray are different cases and should be assessed separately. Detailed waterproofing structure and joint treatment are covered on the dedicated waterproof SPC page; this page states only the limits that apply to the present product.
Stated applications for this product: family living room, balcony, bedroom, children's room and study; commercial settings including shops, play areas, restaurants, hotels and guesthouses. Bathroom use may be possible in residential settings where the installation instructions and warranty terms for the SKU permit it and where the area is not subject to standing water; confirm this before specifying. Commercial suitability depends on the wear layer, test data and warranty terms for the SKU. An 8mm thickness on its own does not guarantee performance under heavy commercial traffic.
Wear Layer, Surface Finishes and Color Options
Wear layer, color, surface texture and backing are configured per order, and each configuration is shown with a matching product photo or color swatch. The wear layer range and backing options actually supplied appear in the specification sheet for each SKU. Buyers should confirm the wear layer and backing combination for their project before quotation and should not read an optional configuration as the default specification.
Installation Requirements and Maintenance
Subfloor preparation, evenness tolerance, expansion gaps along walls and fixed structures, the choice between click-lock floating installation and glue-down installation, and pre-installation checks all follow the installation instructions supplied for the SKU. For concrete subfloors, confirm the vapor barrier requirement against those instructions. Underfloor heating compatibility and temperature limits are likewise confirmed against the product installation guide.
Routine care means sweeping or vacuuming to clear dirt and debris, then damp mopping with a pH-neutral cleaner. Abrasive pads and steam cleaners may damage the wear layer and should be avoided. Spills are wiped up promptly even though the SPC core resists water, so that liquid does not collect in the seams. Felt pads under furniture help prevent surface scratches.
Quality Control and Available Test Reports
Our quality control process covers incoming material checks, in-line inspection during extrusion and lamination, and final inspection of click profiles, dimensions and surface finish. For each SKU the following documents are available on request: product specification sheet, test reports held for that SKU, and the warranty document. We do not claim compliance with a specific standard or certification unless a corresponding document exists for the product and covers that product or production system. Two clarifications matter here. Management-system certificates such as ISO 9001 or ISO 14001, where held, relate to the management system and are not by themselves proof of the slip resistance, waterproofing or wear performance of a particular flooring SKU. EN 13329 is a laminate flooring standard and is not used here as proof of SPC product compliance. Buyers should request the documents relevant to their project before specifying the product.
Bulk Orders, Samples and Project Quotes
To request samples or a bulk quotation, provide the following through the inquiry form: project type, required quantity, destination country, preferred wear layer, attached underlay requirement, and whether you need a sample or a quotation. Name, email and contact details are also required. Not all fields are mandatory; the aim is to collect enough information for an accurate quotation while keeping submission simple.
General supply policy, subject to confirmation per order: samples are available on request, with sample cost and freight terms confirmed at the time of request; MOQ, lead time and customization options are quoted per order according to SKU, quantity and destination; packaging and shipping details are confirmed with the quotation. Buyers with a fixed project schedule should state the required delivery window so that lead time can be checked against it.
Frequently Asked Questions
1. Is 8mm SPC vinyl flooring suitable for bathrooms?
Bathroom suitability depends on the installation instructions and warranty terms for the specific SKU and on the conditions in the bathroom. The SPC core resists water, but joints, wall edges and the subfloor affect overall performance. Occasional splashes and areas holding standing water or receiving direct shower spray should be assessed separately; please confirm your intended use with our team before specifying the product.
2. Does 8mm SPC flooring include an attached underlay?
Attached IXPE or EVA backing is available as a configuration option. Please confirm the backing type and thickness for your order, and whether the backing thickness sits inside or outside the 8mm figure; not all SKUs include an attached underlay.
3. What wear layer options are available for this 8mm SPC flooring?
Available wear layer thicknesses are listed per SKU in the specification sheet. Please state your intended application so the appropriate option can be confirmed; optional specifications are not the same as the default specification.
4. Can 8mm SPC flooring be installed over existing tile?
This depends on the evenness and stability of the existing tile, the condition of the joints and the installation requirements for the specific SKU. It cannot be assumed that all existing tile surfaces are suitable; please provide subfloor details when requesting a quotation.
5. Can I request samples and bulk pricing for an SPC flooring project?
Yes. Submit your project type, required quantity, destination country, preferred wear layer and backing requirement through the inquiry form, and our team will respond with sample and quotation details.
| Application |
Application :Family living room, balcony, bedroom, children's room, study; Business environment: shops, playgrounds, toy shops, restaurants, hotels, guesthouses, churches, etc.
